Welcome to the new design of PCA UCR. It's still in progress so please be patient with any errors and omissions!

2000 C4 What is this part

Tagged: 2000 C4 engine

This topic has 2 replies, 3 voices, and was last updated 7 years, 2 months ago by Mark Gardiner.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
November 14, 2013 at 6:39 am #4808
Mike Lemmon
Participant
Hey There:
I was wondering if someone could tell me what the part is in the attached picture?

I recently purchased a 2000 C4 Cab and have started detailing the engine and found this wired part laying on the right side if the motor.

It is covered in grime so I’m assuming it is an exposed part.

Any help on confirming where it should reside would be greatly appreciated.

Thanks
Mike
Attachments:
1. image.jpg
December 27, 2013 at 1:45 pm #5003

[email protected]
Participant

Hello Mike,

Did you find where this part went? To me it oops as if to could be the plunger to the light that is in your engine bay?

December 30, 2013 at 9:39 am #5006

Mark Gardiner
Participant

Hi, Mike.

It’s an air temperature sensor for the intake manifold (P/N 996-606-113-00-M14).

I originally guessed at it, having recently disconnected the exterior sensor to remove my bumper to clean out the radiators on my 996C2. It looked similar and a quick search found the link attached.

http://www.pelicanparts.com/cgi-bin/smart/more_info.cgi?pn=996-606-113-00-M14&catalog_description=&Air%2520Temperature%2520Sensor%252C%2520Boxster%252FBoxster%2520S%2520(1997-02)%252C%2520Each%2520%2520%2520%2520

Mark
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Upcoming Events