Turn signals are not working

Welcome Forums 914/924/928/944/968 Forum Turn signals are not working

This topic contains 2 replies, has 2 voices, and was last updated by andy wright andy wright 1 year, 6 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #18269

    b.ing
    Participant

    Hi All, went to drive my car the other day and noticed that the turn signals were not working, everything else seems to be fine – hazard lights are fine and working like the they should.

    I haven’t checked the flasher relay, hopng that is the problem, is there a way to test the relay without actually buying and replacing the old one.

    Let me know you thoughts and comments.

    THX.
    Bill

    #18270

    b.ing
    Participant

    Sorry, forgot to say that this is on an 87 944S, don’t know if that makes a difference.

    B.

    #18271
    andy wright
    andy wright
    Participant

    Check the fuses, the Hazard switch and Turn Signals are (I think) separately fused. Check the connector under the dash/steering column for the wiring between the turn signal switch and the flasher module. Next step would be to take the steering column housing off to access the turn signal switch and check with a meter that the switch is getting power.
    Good luck.
    Andy

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.